• Shopping Cart
  • Contact Us
  • Select a Location
    Close Location Selection

    Current Location:

    Let us know the location you'd like to browse.

    Select a Location
    OR

Using Speed Dial 30

Solution

There is no need to remember frequently used phone numbers with Speed Dial 30. Create and use a Speed Dial list of up to 30 local or long distance telephone numbers that are dialed using two digits from 20-49 with the steps below.

Note: Telephone numbers in Speed Dial lists must be ten-digit numbers. Special numbers such as 411, 611, and 911 are not permitted.

Programming a Speed Dial 30 List

Use the steps below to create a list of most frequently used numbers and assign the numbers to a speed code.

  1. Make a list of frequently used phone numbers.
  2. Assign each phone number a two-digit code from 20-49.
  3. Lift the handset and listen for dial tone.
  4. On the handset, press *75. On a rotary phone, dial 1175.
  5. Follow the voice prompts and press 2 to create a Speed Dial list.
  6. Using the list created in step 2, enter the two-digit speed code.
  7. Enter the phone number to assign to that speed dial code.
  8. Press the # key.

    Result: The system reads the entry back.
     
  9. The system prompts to continue or exit.
    • To continue adding new codes and assign phone numbers, press 2, then repeat steps 6-9 until the list is complete.
    • To exit, hang up or press 9.

Changing a Speed Dial 30 List

Use the steps below to change an existing Speed Dial 30 list.

  1. Lift the handset and listen for the dial tone.
  2. Press *75. On a rotary phone, dial 1175.
  3. Follow the voice prompts and press 2 to change an entry in a list.
  4. Enter the two-digit speed code that will be updated.

    Result: The system reads the entry back.
     
  5. The system prompts to press one of the following keys.
    • To replace the speed code, press the # key.
    • To enter a new phone number for that speed code, press the * key.
    • To remove a speed code and assigned phone number, press 3.
    • To hear the list, press 6
  6. To exit, hang up or press 9.

Making a Phone Call With a Speed Code

Use the steps below to make a phone call using an existing speed code assigned to a phone number.

  1. Lift the handset and listen for the dial tone.
  2. Enter the two-digit speed code (20-49) assigned to the phone number to be called.

Search for More Articles