Netgear CBR40

Details


Modem Information DOCSIS 3.0 32x8 Dual Band WiFi Modem To achieve Gigabit speeds or higher, a DOCSIS 3.1 modem is required	Highest Service Level Go Even Faster - 500 Mbps

Modem Information

DOCSIS 3.0 32x8 Dual Band WiFi Modem

To achieve Gigabit speeds or higher, a DOCSIS 3.1 modem is required

Go Even Faster - 500 Mbps

Check your power adapter connections if the Power LED is not solid blue.

The Netgear CBR40 includes the following connection ports:

POWER - Connects the modem to the power adapter
RESET - Restores factory settings
ETHERNET - Provides internet access to a single device. Only one port is active at a time.
CABLE - Connects to coaxial cable

The lights indicate the current status of your cable modem. To troubleshoot any connection problems, use the table below.

Modem Light	Status	Problem
Power	Solid White	None. The modem is receiving power and is functioning normally.
	Off	The modem is not receiving power. Verify power supply connections and electrical outlets. Ensure the outlet is not connected to a switch.
	Solid Red	The modem is too warm and could overheat. Power off the modem, let it cool, and move it away from heat sources, such as a TV, DVD player, or speakers.
Internet	Solid Blue	None; the cable modem router is online.
	Blinking Blue	The modem synchronizes with the cable provider's Cable Modem Termination System (CMTS).
	Off	The cable modem is offline. Verify all cable connections and try resetting the modem.
Upstream	Solid Amber	One upstream channel is locked.
	Solid Blue	Two or more upstream channels are locked.
	Blinking Blue	The modem is scanning for an upstream channel.
	Off	No upstream channel is locked.
Downstream	Solid Amber	One downstream channel is locked.
	Solid Blue	Two or more downstream channels are locked.
	Blinking Blue	The modem is scanning for a downstream channel.
	Off	No downstream channel is locked.