The Contour Voice Remote can be programmed for TVs and audio devices, and pairs with Contour 2 receivers to enable aim free control.
This remote offers some of the latest features:
Note: The ability to replay live or recorded TV can be done using one of the following methods.
The color of the LED indicates whether the remote is operating in infrared (IR) or radio frequency (RF) mode, as shown in the table below.
|Green||A command was sent and received in RF mode.||No action required, the remote is paired to the receiver. If there is latency of more than 5 seconds, unpair and re-pair the remote and receiver.|
|Green, red||A command was sent in RF mode, but receiver did not confirm.||Unpair and re-pair the remote and receiver.|
|Red||A command was sent in IR mode. The LED blinks red once for all TV and audio device commands.||If the remote LED blinks red after a command to the receiver, such as pressing the GUIDE button, the remote is in IR mode. Unpair and re-pair the remote and receiver for RF operation.|