• Contact Us
  • Select a Location
    Close Location Selection

    Current Location:

    Let us know the location you'd like to browse.

    Select a Location
    OR

    Already a Cox Residential customer?

    Looking for Business service? Go to Cox Business

support site section

Support

Cisco DPQ3925

Details




Modem Information

DOCSIS 3.0 Single Band WiFi Internet and Telephone Modem

8x4 channel bonding with speeds of up to 150 Mbps

My WiFi Compatible

Cox recommends a DOCSIS 3.1 modem or gateway

Highest Service Level

Go Fast - 100 Mbps


Combination Internet and Telephone modems purchased or received in new or used condition from third-party retailers are not certified for use with the Cox network.



Front View

image of front View of DPQ3925 gateway

Click to enlarge.

The Cisco DPQ3925 is a DOCSIS 3.0 wireless residential WiFi modem with an embedded digital voice adapter. It is a high-performance home WiFi modem that combines a cable modem, two-line digital voice adapter, router, and wireless access point in a single device. This Internet and Telephone Modem is a cost-effective voice and networking solution for the home and small office.

  • It provides a faster connection to the Internet and can be activated for up to two phone lines.
  • Requires subscription to Cox Digital Telephone, Cox High-Speed Internet service, or both.

After the WiFi modem is successfully connected to the network, the POWER, DS, US, ONLINE, ETHERNET (1-4), USB, WIRELESS LINK, SETUP, TEL1, TEL2, and BATTERY indicators illuminate continuously to indicate that the gateway is online and fully operational. For more details, refer to the Modem Lights section.




Back View

image of back View of DPQ3925 gateway

Click to enlarge.


The Cisco DPQ3925 includes the following connection ports:

  • POWER - Connects the wireless home gateway to the AC power source
  • ETHERNET (1-4) - Provides internet access to a single device. Only one port is active at a time.
  • USB - Connects to the USB port on your computer
  • TELEPHONE 1 and 2 - Connects to home telephone wiring and conventional telephones for or fax machines
  • RESET - Used by Cox maintenance to reset the cable modem - may delete all previous settings
  • WIRELESS SETUP - Activates Wireless Protected Setup (WPS), which allows you to add wireless devices to the wireless network of the residential gateway
  • CABLE - Connects to an active cable signal from your service provider



MAC Address

image of MAC Address of DPQ3925 gateway

Click to enlarge.


The information below is usually found on a sticker at the bottom of the device.

  • The S/N is the serial number of the DPQ3925.
  • The CM MAC is the MAC address of the DPQ3925.

Troubleshooting

Gateway lights on DPQ3925 gateway


The lights indicate the current status of your Internet and Telephone modem. To troubleshoot any connection problems, use the table below.
 

Internet and Telephone LightStatusProblem
POWERSolid GreenNone
OffNo power - Verify that the power supply and electrical outlet connections are secure. Also, make sure the outlet is not connected to a switch.

DS 

(Downstream)

Solid GreenNone
Blinking GreenInternet and Telephone modem establishing a connection from the Internet to the computer - Verify all cable connections and try resetting the device.

US

(Upstream)

Solid GreenNone
Blinking GreenInternet and Telephone modem trying to connect to service - looking for upstream - Verify all cable connections and try resetting the device.
OffInternet and Telephone modem establishing a connection from the computer to the Internet - Verify all cable connections and try resetting the device.
ONLINESolid GreenNone
OffNo connection - Verify all cable connections and try resetting the device.
ETHERNET 1-4Solid GreenNone - a device is connected to the Ethernet port
Blinking GreenNone - a device is connected to the Ethernet port, and data is sent to or from the Internet and Telephone modem.
OffNo connection - Verify all cable connections and try resetting the device.
WIRELESS LINKSolid GreenNone - the Wireless Access Point is operational
Blinking GreenNone - data is being transferred over the wireless connection
OffThe user has disabled the wireless access point - Verify all cable connections and try resetting the device.
TEL 1
TEL 2 		Solid GreenNone. Indicates service is enabled
Blinking GreenNone - Line 1 or Line 2 is in use
BATTERYSolid GreenNone - battery is charged
Blinking GreenBattery charge is low - Ensure the power cord and an active power source are connected to the unit.
OffNo battery in the unit

Manufacturer Resources

For more detailed technical information on the DPQ3925, use the resources below from Cisco.

Search for More Articles

© 1998 - 2024 Cox Communications, Inc.