• Contact Us
  • Select a Location
    Close Location Selection

    Current Location:

    Let us know the location you'd like to browse.

    Select a Location
    OR

Replacing the IQ Mini Door / Window Sensor Battery

Solution

The IQ Mini door / window sensor requires two CR2032 batteries.

1

Insert a coin in the slot and twist gently to remove the cover.

Note: If a coin is not available, insert a small flat-head screwdriver into the side slot of the plastic cover and twist to open each side.

2

Remove the old CR2032 batteries by sliding them out from the side.

Image of the IQ Windor / Door Sensor
3

Insert the new CR2032 batteries.

Note: The + should be facing up.

4

Snap the cover into place and ensure it is closed securely to avoid any tamper notifications.

Note: After replacing the battery, the system may take up to five minutes to clear the low battery warning message.

New MyAccount

Cox Business MyAccount Updates

With the new and improved MyAccount portal from Cox Business, you’re in control. Included with your Cox Business services, it’s all right at your fingertips anytime, anywhere. 

 

  • Perform a health check on your services and reset your equipment
  • Easily configure key features and settings like voicemail and call forwarding
  • View your balance and schedule payments

Search Cox Business Support

Didn't Find What You Were Looking For? Search Here.