The Contour 2 voice remote can be programmed for TVs and audio devices, and pairs with Contour 2 receivers to enable aim free control.
This remote offers some of the latest features:
The color of the LED indicates whether the remote is operating in IR or RF mode, as shown in the table below.
|Green, green||A command was sent and received in RF mode.||No action required, the remote is paired to the receiver. If there is latency of more than 5 seconds, unpair and re-pair the remote and receiver.|
|Green, red||A command was sent in RF mode, but receiver did not confirm.||Unpair and re-pair the remote and receiver.|
|Red||A command was sent in IR mode. The LED blinks red once for all TV and audio device commands.||If the remote LED blinks red after a command to the receiver, such as pressing the GUIDE button, the remote is in IR mode. Unpair and re-pair the remote and receiver for RF operation.|
Search Cox Business Support
Didn't Find What You Were Looking For? Search Here.