PRINTERNTER FRIENDLY •  Explorer 2000 (158 KB/1 page)  •  Explorer 2200 (158 KB/1 page)  •  Scientific Atlanta Remote (158 KB/1 page)  •  CheckMate III Remote (158 KB/1 page)  •  CheckMate IV Remote (158 KB/1 page)  •  SA 2000 Remote Codes (158 KB/1 page)

Explorer 2000

Explorer 2200

Connect the DHCT to a Stereo TV and Non-Stereo VCR

1. Unplug all electronic devices before connecting the DHCT.
2. Connect the DHCT to the TV and VCR.
3. Connect the DHCT to the coaxial cable coming from the wall.
4. Plug the DHCT and the TV into an AC power source.
5. Important: Do not press the Power key on the DHCT yet.
6. Turn on the power to your TV, and set the input channel assigned by Cox (channel 3 or 4).
7. Wait for the time to display on the LED display.
8. Important: It takes 2 to 3 minutes for the DHCT to be updated with the latest programming and service information. When the front panel displays the time, the update is complete.
9. Press the Power key on the DHCT.

Access Cable Services and Programs

You can access your cable services using the remote control or the keys on the front panel of the DHCT.

• Press the Guide key to access the on-screen guide.
• The on-screen guide displays schedules of TV programs and other services available from your cable service provider, such as video-on-demand and pay-per-view programs.
• Use the arrow keys to highlight a program in the schedule.
• Press the Info key for a description of a specific program (either from the on-screen guide or while viewing a program).
• Press the Select key to view a specific program in the guide.