On the back panel of today's HDTV sets, a number of video inputs are available. Depending on the model, the HDTV may have one video input for the cable receiver, another video input for a DVD player, another video input for a PlayStation or Xbox console, and so on. (See illustration below.)

To select the high-defrintion video input, follow these steps:

1. Turn on the cable receiver and HDTV set.
2. Press the TV button once on the remote control for the cable receiver.
3. Press the VIDEO SOURCE (or may say INPUT) button to switch from one video input source to another.
4. Keep pressing the VIDEO SOURCE or INPUT button until the phrase, HDTV Video Input, displays on the TV screen.

Note: Some TVs use the phrasing,Video Input 1, Video Input 2, and so on. Refer to the TV owner's manual for assistance.

Note: If you are unable to change the video input source with the Cox remote control, use your HDTV's remote control. If necessary, refer to your HDTV owner's manual for instructions on changing the input source.

5. Press the CBL (Cable) button once on the Cox remote control and then use its channel buttons or GUIDE button to navigate to HDTV programs.

In the illustration below, the Camcorder is on Video Input 1, the Game Console in on Video Input 3, the VCR is on Video Input 4, the Cox HD cable box is on Video Input 5, the DVD player in on Video Input 6, and the HDMI/DVI in on Video Input 7.