Did you forget your voice mail password? How about problems with the fax machine? Going on a trip and need to manage call forwarding? Whatever your question, we make sure our digital telephone support has the answers.
Troubleshooting Hardware and Calling Features
Last Updated: Thu, 01 Dec 2016 > Related Articles
View troubleshooting steps for your calling features and phone hardware.
Refer to the table below for steps to take to troubleshoot your phone hardware
|My phone has no dial tone.|
|My phone is not ringing.||Check the volume and ringer controls on your phone to make sure the settings are correct. If the problem persists, call 611.|
|I am getting short rings on my phone and no one is there when I answer.||If your phone is giving only one short ring, you may have Call Forwarding activated on your line.|
To disable call forwarding dial *73.
|One of my phone jacks is not working.|
|I cannot use my fax machine or modem; my voicemail has a stutter tone.|
If you are unable to clear the stutter tone by retrieving your messages, try adding commas in front of the phone number you are dialing.
Commas tell the equipment to delay before dialing. Try adding 6 to 8 commas to delay the equipment until the stutter dial tone for voice mail goes away.
|Will my phone stop working if my cable goes out?|
Not necessarily because cable outages can occur for a variety of reasons that may not affect the telephone service.
Refer to the table below for steps to take to troubleshoot your calling features.
|I have Anonymous Call Rejection enabled, but I am still receiving out-of-area and unavailable calls.||Anonymous Call Rejection does not block unknown or out-of-area callers. This feature only blocks callers that have Caller ID blocking.|
|I cannot dial 900 numbers.||If you are having a problem dialing a 900 / 976 number, call 611 for assistance.|
|I cannot block 800 or 888 calls.||Use Selective Call Rejection (*60) to block most numbers, including 800 numbers.|
Note: Selective Call Rejection does not currently work with the SBV5222 Motorola modem. Contact us to find out more.
|I'm having problems dialing an international number.||When dialing an International number, it is not necessary to start your dialing with a "1" as it is replaced by the "011" code.|
|I cannot use some of my phone features. I hear a fast busy signal.||If you hear a fast busy signal when you try using a feature, this sound means that you do not subscribe to the feature. Contact us to add the feature to your telephone services.|
|I cannot dial out. When I try, I hear beeps and clicks.||Check your phone setting and make sure the phone is set to "Tone" and not "Pulse."|
|Why do I need to dial an area code for certain local calls?||With the large volume of telephone numbers being used today, many area codes have been split to allow for more telephone numbers to be introduced. These new area codes are associated with routing the call to specific communities and are required to complete the call.|