• Español
  •  
  • Select a Location
    Select a Location

    Welcome!

    Let us know the location you'd like to browse.

    or

    Already a Cox Residential customer?

    Looking for Business services? Go to Cox Business home

Internet

The Internet should add convenience, not headaches. From step-by-step instructions to helpful tips, we'll help you install your equipment, troubleshoot problems, and get the most out of your online experience – minus the migraine.

Back Print Article

Zoom 5352

Last Updated: Mon, 17 Aug 2015 > Related Articles

2 rated this

Summary

Learn about the available ports and an explanation of the status lights on the Zoom 5352 WiFi Cable Modem.

Solution


 


Front View 

 
Front View Zoom 5352 modem


After the cable modem is successfully registered on the network, the POWER, DS, US, and ONLINE indicators illuminate continuously to indicate that the cable modem is online and fully operational. For more details, refer to the Modem Lights section.

Back View   
Back View Zoom 5352 modem


The Zoom 5323 has the following ports available on the back of the WiFi modem.

  • POWER ON / OFF - Turns the modem / router on and off.
  • CABLE - Connects to the cable wall outlet.
  • ETHERNET - Four ports to connect to the Ethernet port on the computer or home network.
  • RESET - Use this button in the unlikely event that you want to restore the default factory settings.

Note: The RESET button is for maintenance purposes only. For more details, refer to the Modem Lights section.

Modem Lights   
Lights on Zoom 5352 modem
 

The modem lights indicate the current status of your WiFi cable modem. To troubleshoot any connection problems, use the table below.

Modem LightStatusProblemSolution
PowerOffNo powerVerify all cable connections and try resetting the modem. If cable is OK and modem reset does not work, contact Customer Support.
Solid GreenNoneN/A

DS 

(Downstream)

Blinking GreenScanning for downstream channelVerify all cable connections and try resetting the modem. If cable is OK and modem reset does not work, contact Customer Support.
Solid GreenNone - connection established on one channelN/A
Solid BlueNone - operating on more than one channel (downstream bond mode)N/A

US

(Upstream)

OffUpstream channel is inactiveVerify all cable connections and try resetting the modem. If cable is OK and modem reset does not work, contact Customer Support.
Blinking GreenScanning for upstream channelVerify all cable connections and try resetting the modem. If cable is OK and modem reset does not work, contact Customer Support.
Solid GreenNone - connection established on one channelN/A
Solid BlueNone - operating on more than one channel (upstream bond mode)N/A
ONLINEOffNo connectionVerify all cable connections and try resetting the modem. If cable is OK and modem reset does not work, contact Customer Support.
Solid GreenNone - modem is operationalN/A
LINK 1 - 4OffNo Ethernet link detectedN/A
Blinking GreenNone - data is flowingN/A
Blinking AmberNone - data is flowingN/A
Solid GreenNone - connected to 10 or 100 MbpsN/A
Solid AmberNone. - connected at 10 or 100 MbpsN/A
WPSOffNo WiFi client associated with the cable modem via WPSEnable WiFi.
Blinking GreenNone - WPS is in discovery mode, (LED blinks for up to 2 minutes)N/A
Solid GreenNone - WPS configuration is successfulN/A
WLANOffWiFi disabledEnable WiFi.
Blinking GreenData flowingN/A
Solid GreenNone - WiFi is enabledN/A

MAC Address Label 

 
MAC Address on Zoom 5352 modem

 
MAC addresses are written as 12 digits containing both letters and numbers (0-9, A-F).A MAC address is unique. The first six characters of the MAC address are unique to the manufacturer of the device.

Manufacturer Resources 


Rate this Article:

Related Topics:

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?