Internet

The Internet should add convenience, not headaches. From step-by-step instructions to helpful tips, we'll help you install your equipment, troubleshoot problems, and get the most out of your online experience – minus the migraine.

Back Print Article

Configuring a Computer for Cox High Speed Internet Service

Last Updated: Mon, 14 Sep 2015 > Related Articles

139 rated this

Summary

Learn how to configure a computer for Cox High Speed Internet service.

Solution

Configuration Information

If your computer requires the installation of a Network Interface Card (NIC) and you are having difficulties proceeding with the installation, you may need to configure TCP/IP using DHCP. See the TCP/IP Setup Selections section.
 
If your computer is already part of a network, you must modify the network configuration on your computer to connect to Cox High Speed Internet. One of the following actions is required.

  • Change your computer's configuration, disconnecting from the network, and then connecting to Cox High Speed Internet.
  • Use another computer which is not connected to the network to connect to Cox High Speed Internet.
  • Use the Dynamic Host Configuration Protocol (DHCP) service to obtain the following items.
    • IP Address
    • Default gateway
    • Domain Name Service (DNS) address

TCP/IP Setup Selections 

See your operating system for instructions on how to configure your network settings for use with Cox Speed Internet service.


Rate this Article:

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article