Learn how to protect, connect, and relax with support for your Homelife service. From arming and disarming your alarm, to managing your portal, Cox Homelife Support helps you with troubleshooting and step-by-step solutions.
Setting the Screensaver for Cox Homelife Touchscreen
Last Updated: Tue, 15 Sep 2015 > Related Articles
Learn how to set the screensaver for your Cox Homelife touchscreen.
Follow the steps below to set up the screensaver for your Cox Homelife touchscreen.
Note: The touchscreen will not enter screensaver mode when it is armed.
On the touchscreen home screen, tap Settings.
Enter the Master Code to proceed to the Settings menu.
From the Settings menu, tap TouchScreen.
From the Touchscreen menu, tap Screensaver Configuration.
Result: The Screensaver Configuration screen displays.
On the Screensaver Configuration screen complete the following steps:
Tap the left Start Screensaver arrow to decrease the time elapsed before the screensaver activates. Tap the right Start Screensaver arrow to increase the time elapsed before the screensaver activates.
Note: The maximum time elapsed is 30 minutes, the minimum is 5 minutes.
- Scroll to see the available screensavers. Tap the screensaver that you would like to use.
The table below explains the commonly used screensavers.
|None||The screen never goes to screensaver.|
|Security||Screen displays the Arm System tab from the Security app.|
|Camera||Displays stills of the cameras attached to the security system. The stills will update every five seconds. If there is only one camera attached to the security system, a live video will display.|
|Clock||Displays the current time in digital or analog format.|
|Blank||Displays a blank screen.|