Learn how to protect, connect, and relax with support for your Homelife service. From arming and disarming your alarm, to managing your portal, Cox Homelife Support helps you with troubleshooting and step-by-step solutions.
Last Updated: Tue, 14 Feb 2017 > Related Articles
Learn about the available ports and the status lights on a Netgear CG3000D WiFi modem.
For installation instructions, refer to the following articles.
The Netgear CG3000D has the following ports available on the back of the gateway.
- ETHERNET - Four ports connect to the Ethernet port on your computer or home network.
- USB - Connects to selected client devices.
- CABLE - Connects to the cable wall outlet.
- POWER - Connects the gateway to the power adapter.
- POWER ON / OFF - Turns the gateway on and off.
|POWER||Off||No power||Verify all cable connections and try resetting the modem. If cable is OK and modem reset does not work, contact Customer Support.|
|Blinking Green||Scanning for downstream||Verify all cable connections and try resetting the modem. If cable is OK and modem reset does not work, contact Customer Support.|
|Solid Green||None - connection from the computer to the Internet established on one channel||N/A|
|Solid Blue||None - operating on more than one channel (downstream bond mode)||N/A|
|Off||Upstream channel inactive||Verify all cable connections and try resetting the modem. If cable is OK and modem reset does not work, contact Customer Support.|
|Blinking Green||Scanning for upstream channel|
|Solid Green||None - connection from the Internet to the computer established on one channel||N/A|
|Solid Blue||None - operating on more than one channel (upstream bond mode)||N/A|
|Solid Green||None - cable WiFi modem operational||N/A|
|Slow Blink||None - cable WiFi modem receiving DHCP information||N/A|
|Fast Blink||None - cable WiFi modem downloading a configuration file||N/A|
LINK 1 - 4
|Off||No Ethernet link detected||N/A|
|Blinking Green||None - data flowing||N/A|
|Blinking Amber||None - data flowing||N/A|
|Solid Green||None - connected to 1000 Mbps||N/A|
|Solid Amber||None - connected at 10 or 100 Mbps||N/A|
|On||None - WiFi enabled.||N/A|
|WPS Button||Blinking||None - This button lets you use WPS to join the WiFi network without typing the WiFi password.||N/A|
The Netgear CG3000D comes configured with wireless security. By default, the Netgear home networking gateway supports up to 802.11n wireless standards and uses WPA / WPA2 wireless security settings. The SSID and Passphrase are printed on the label on the gateway.
- The SSID on the gateway is the same as the last 6 characters of the Wireless MAC address.
- The Passphrase is the same as the 9-digit serial number of the home networking gateway.