• Español
  •  
  • Ashburn, VA

    Let us know the location you'd like to browse.

    or

    Already a Cox Residential customer?

    Looking for Business services? Go to Cox Business home

Home Security

Learn how to protect, connect, and relax with support for your Home Security service. From arming and disarming your alarm, to managing your portal, Cox Home Security Support helps you with troubleshooting and step-by-step solutions.

Back Print Article

Arming and Disarming Your Cox Home Security System

Last Updated: Fri, 22 Aug 2014 > Related Articles

7 rated this

Summary

Learn about the armed states and how to arm and disarm your Cox Home Security system.

Solution

Arming modes for the Cox Home Security system:

  • Away - everyone is going "away" from the home.
  • Stay - someone might be "staying" in the home.
  • Night - everyone is in for the "night," and no one will enter or leave after arming.

You can be notified when the system is armed via email and text messages.

Arming ModePerimeter Door / WindowMotion Detectors
AwayActivatedActivated
StayActivatedNot Activated
NightActivatedNot Activated

Arming and Disarming Your Cox Home Security System

Use the steps below to learn how to arm your home security system using:


Arming and Disarming Using Key Fob

  • Arm
  • On the key fob, press the Arm Away button for 1.5 seconds to arm the system.

    Result: The LED flashes red once to indicate that it has contacted the system, then lights red for one second.

    If a door or window is open, the Exit Delay starts at this time. There is a 30 second default period before the system is active. The LED will flash orange seven times if the system is not ready.

  • Disarm
  • Press the Disarm button on the Cox Home Security key fob.

    Result: The LED flashes green once to indicate that it has contacted the system and then lights green for one second. 


Arming and Disarming Using Keypad

 

  • Arm Away Mode - Use this mode when no one is on the premises.
    1. Enter a valid keypad code.
    2. Press the Arm button to place the system in Arm Away mode

      Result:The Unarmed button turns red for 3 seconds.
  • If a door or window is open, the Exit Delay starts at this time. There is a 30 second default period before the system is active. The LED will flash orange seven times if the system is not ready.

  •  
  • Arm Stay Mode -  Use this mode when the home / office is still occupied.
    1. Enter a valid keypad code.
    2. Press the Arm button to arm the system in Arm Stay mode.

    • Result: The Unarmed button turns red for 3 seconds.
  • If a door or window is open, the Exit Delay starts at this time. There is a 60 second default period (120 seconds maximum) with no beeping from the Touchscreen. The LED will flash orange seven times if the system is not ready. 

     

  • Disarm - To disable Away or Stay modes
    1. Enter a valid key pad code.
    2. Press the Unlock button to disarm the system.

      Result: The unlock button turns green for three seconds to indicate that the system has been disarmed.
  • There is no entry delay period.


Arming and Disarming using Subscriber Portal

  • Arm
    1. Click the Security Status header when the system is in the Disarmed state or select Security > Arm on the toolbar.

      Result: A dialog box appears.

    2. Select the Arming Mode and enter the Keypad Code
    3. Click Arm Now.

If any security zones are currently faulted, preventing the system from being armed, you must click the Turn Zone Off button for that zone before arming the system.

Turning zones off means that they will not cause an alarm to be faulted if they are tripped.

 

  • Disarm
    1. Click the Security Status header when the system is in the Armed state or select Security > Disarm on the toolbar.

      Result: A dialog box appears.

    2. Enter the Keypad Code.
    3. Click Disarm

Arming and Disarming Using Touchscreen

  • Arm Stay
    1. On the Touchscreen, touch the Security widget or touch the Disarmed - Press to Arm button on the
      Home screen. 
    2. Choose the Arm System tab. 
    3. Touch Arm Stay.
    4. Enter your Keypad Code.
  • Arm Away
    1. On the Touchscreen, touch the Security widget or touch the Disarmed - Press to Arm button on the
      Home screen. 
    2. Choose the Arm System tab. 
    3. Touch Arm Away.
    4. Enter your Keypad Code.
  • Arm Night  
    1. On the Touchscreen, touch the Security widget or touch the Disarmed - Press to Arm button on the
      Home screen. 
    2. Choose the Arm System tab. 
    3. Touch Arm Night.
    4. Enter your Keypad Code.

Notes

  • The touchscreen generates short, audible alerts while arming, indicating 60 seconds for exit. When you enter
    your home when the system is armed, you will hear audible alerts for 30 seconds.
  • If any security zones are currently faulted, preventing the system from being armed, you must click the Turn Zone Off button for that zone before arming the system.
  • Turning zones off means that they will not cause an alarm to be faulted if they are tripped.
  • Disarm
    1. Press the Armed – Press to Disarm button on the
      Home screen.
    2. Enter your Keypad Code

Arming the Security System with the Mobile Application


The steps below will allow you to arm your home security
system from your mobile phone.

  1. Open and log in to the Cox Home Security mobile
    application.
  2. Press the green Security-Disarmed icon.

    Result: The Security screen displays. 
  3. Tap Disarmed – Press to Arm.

    Result: The Choose How to Arm screen displays. 
  4. Make a selection based on your present situation:
    • Is someone staying in your home? Tap Arm Stay.
      Note: You may want to arm only certain zones.
    • Is no one staying in your home? Tap Arm Away.
      Note: You may want to arm all zones.
    • Is someone staying in your home? Tap Arm Night.
      Note: You may want to arm only certain zones.
  5. Enter your 4-digit keypad code to arm the system.
  6. The system will give you a countdown, during which you
    may cancel. To cancel arming, you will need to re-enter
    your security code.

Disarming the Security System


The steps below will allow you to disarm your home security
system from your mobile phone.

  1. On the Home screen, tap the red Security – Armed icon.
  2. Or, on the Security screen, tap the red Armed – Press to
    Disarm
    icon.
  3. Enter your 4-digit keypad code to disarm the system.

Rate this Article:

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?